Aggregating Transponder
MS-200E and MS-D100E

40GE, OTU3, STM-256 client signal support

Support for client modules SFP+, SFP28, QSFP+, QSFP28
Aggregation of signals 10 - 100 Gbit/s
Optimal solution for multiservice systems
Possibility of 1 +1 redundancy for line and ring networks

The block supports aggregation of client 10 Gbit/s signals into a 100 or 200 Gbit/s channel. Optical modules SFP+, SFP28, QSFP+, QSFP28 are used as client interfaces, which allows organizing the transfer of various protocols 10, 40, 100 Gbit/s in a single linear stream. Support for linear and standard coherent DWDM CFP2-modules optimizes the price/productivity ratio. The universal architecture enables the network to be expanded and modified during the exploitation. The characteristics of the line interface are determined by the installed optical module and may differ from those shown in the table.

Characteristics

Line Interface	Operating Mode
	MS D100EC2 - SX10/Q40Q	MS 200EC2 - SX10/Q40Q
Number of interfaces	2	1
Interface type	CFP2
Interface standard	OTU4 / OTUJ	OTUJ
Modulation format	DP-DQPSK	DP-8QAM or DP-16QAM
Frequency grid	50 GHz
Automatic dispersion correction	up to ± 40 ns/nm	up to ± 20 ns/nm
Wavelength range	1528,7-1567,1 nm
OSNRT (0.1 nm, BER=10 ^-12)	11.4 dB	18.1 dB or 19.2 dB
FEC	G.709 / SD-FEC 15%	SD-FEC 15%
Output power (BER=10 ^-12)	- 15...+ 1 dBm
Receiver sensitivity	-22 dBm
Receiver overload	0 dBm
Lightning protection	5 Mrad/s	1,6 Mrad/s
Power consumption	140 W	125 W

Client interface for any execution	SFP+	SFP28	QSFP+	QSFP28
Quantity	6	3 (100 Gbit/s) 6 (200Gbit/s)	2 (100 Gbit/s) 4 (200Gbit/s)	1 (100 Gbit/s) 2 (200Gbit/s)
Interface standard	10GE, OTU2, STM-64, 8/10/16GFC/CPRI 4.9/6.1/9.8G	32GFC, 25GE	40GE, OTU3, STM-256	100GE, OTU4

НПО «Восток»

Республика Казахстан, 050057 Алматы

ул. Сатпаева 36, кв. 4 (уг.ул. Ауэзова)

Тел./факс:+7 (727) 274-2190

+7 (727) 328-6332

Моб.тел.:+7 (701) 1111-682

Aggregating Transponder MS-200E and MS-D100E

Characteristics

Aggregating Transponder
MS-200E and MS-D100E